Add source into /Porting/Source/APP/Software_Module/Samba/src
Then tell the compile where to compile.
Samba download from http://www.samba.org/
1. Add rule top Makefile
vim UBEE_D3_CableRG\ti\gw\src\Makefile
add the line below
subdir-y += $(TARGET_HOME)/Porting/Source/APP/Software_Module/Samba/src
2. Make sub Makefile
vim UBEE_D3_CableRG/Porting/Source/APP/Software_Module/Samba/src/Makefile
#include $(TARGET_HOME)/TI_Build.make
include $(TARGET_HOME)/.config
PACKAGE_VERSION := samba-3.0.23
PACKAGE_DIR := samba-3.0.23/source
PACKAGE_CONF := \
--host=$(patsubst %-gcc,%,$(CROSS)gcc) --disable-cups --disable-iprint \
--prefix=/ --without-ldap --without-ads --enable-shared --disable-pie \
--cache-file=config.cache --bindir=/usr/bin --sbindir=/sbin \
--datadir=/nvram/samba --sysconfdir=/etc/samba --localstatedir=/var \
--libdir=/lib --with-privatedir=/nvram/samba/private --with-configdir=/etc/samba \
--disable-largefile --enable-swat=no --enable-iprint=no --enable-fam=no --enable-dnssd=no \
--with-libtalloc=no --with-libtdb=no --with-libnetapi=no --with-libaddns=no \
--with-acl-support=no samba_cv_CC_NEGATIVE_ENUM_VALUES=yes \
libreplace_cv_HAVE_GETADDRINFO=no
first_rule: all
all: build
$(CURDIR)/$(PACKAGE_DIR)/Makefile:
@cd $(CURDIR)/$(PACKAGE_DIR) && CC=$(CROSS)gcc ./configure $(PACKAGE_CONF)
build_lib: $(CURDIR)/$(PACKAGE_DIR)/Makefile
@$(MAKE) -pie -C $(CURDIR)/$(PACKAGE_DIR) all
build: build_lib install_rule
config_rule:
install_rule:
mkdir -p $(TARGET_HOME)/build/dgwsdk/fs/base_fs/usr/local/samba/var
mkdir -p $(TARGET_HOME)/build/dgwsdk/fs/base_fs/usr/local/samba/private
mkdir -p $(TARGET_HOME)/build/dgwsdk/fs/base_fs/usr/local/samba/lib
cp -af $(PACKAGE_DIR)/bin/smbd $(TARGET_HOME)/build/dgwsdk/fs/base_fs/usr/sbin
cp -af $(PACKAGE_DIR)/bin/nmbd $(TARGET_HOME)/build/dgwsdk/fs/base_fs/usr/sbin
cp -af $(PACKAGE_DIR)/bin/smbpasswd $(TARGET_HOME)/build/dgwsdk/fs/base_fs/usr/bin
cp -af $(PACKAGE_DIR)/bin/mount.cifs $(TARGET_HOME)/build/dgwsdk/fs/base_fs/usr/sbin
cp -af $(PACKAGE_DIR)/bin/umount.cifs $(TARGET_HOME)/build/dgwsdk/fs/base_fs/usr/sbin
clean_rule:
uninstall_rule:
3. When execute configure (error)
Error 1:
error: cannot run test program while cross compiling error
checking that the C compiler understands negative enum values... configure: error: in `/root/samba-3.3.3/source':
configure: error: cannot run test program while cross compiling
configure can't check for cross compile - samba_cv_CC_NEGATIVE_ENUM_VALUES。
Solution：
#echo samba_cv_CC_NEGATIVE_ENUM_VALUES=yes>linux.cache
Add the line (like below) to UBEE_D3_CableRG/Porting/Source/APP/Software_Module/Samba/src/Makefile
--cache-file=linux.cache
Error 2:
configure: error: cannot run test program while cross compiling错误
configure: error: in `/root/samba-3.3.3/source':
configure: error: cannot run test program while cross compiling
See `config.log' for more details
Solution 1：
if test "$cross_compiling" = yes; then
{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ { $as_echo "$as_me:$LINENO: error: cannot run test program while cross compiling
See \`config.log' for more details." >&5
$as_echo "$as_me: error: cannot run test program while cross compiling
See \`config.log' for more details." >&2;}
}; }
＃mark this line { (exit 1); exit 1; }; }; }
else
cat >conftest.$ac_ext <<_ACEOF
.
Solution 2：
if test "$cross_compiling" = yes; then
＃{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
＃$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
＃{ { $as_echo "$as_me:$LINENO: error: cannot run test program while cross compiling
＃See \`config.log' for more details." >&5
＃$as_echo "$as_me: error: cannot run test program while cross compiling
＃See \`config.log' for more details." >&2;}
}; }
＃mark this line { (exit 1); exit 1; }; }; }
＃else
cat >conftest.$ac_ext <<_ACEOF
4. When execute Compile (error) :
../../../src/libgcc/config/libbid/bid_decimal_globals.c: In function
‘__dfp_set_round’:
../../../src/libgcc/config/libbid/bid_decimal_globals.c:34:1: error:
unrecognizable insn:
(call_insn/u 6 5 7 3 (parallel [
(set (reg:DI 0 ax)
(call:DI (mem:QI (symbol_ref:DI ("__tls_get_addr")) [0 S1 A8])
(const_int 0 [0])))
(unspec:DI [
(symbol_ref:DI ("__bid_IDEC_glbround") [flags
0x10] <var_decl 0x2abaca167000 __bid_IDEC_glbround>)
] UNSPEC_TLS_GD)
]) ../../../src/libgcc/config/libbid/bid_decimal_globals.c:33 -1
(expr_list:REG_EH_REGION (const_int -2147483648 [0xffffffff80000000])
(nil))
(nil))
../../../src/libgcc/config/libbid/bid_decimal_globals.c:34:1: internal
compiler error: in extract_insn, at recog.c:2109
Please submit a full bug report,
with preprocessed source if appropriate.
See <http://gcc.gnu.org/bugs.html> for instructions.
Solution :
you can take to running a program at high addresses is
to use -pie, which lets you move the program around in
memory.
Add -pie like below
@$(MAKE) -pie -C $(CURDIR)/$(PACKAGE_DIR) all
5. Configuration /etc/samba/smb.conf :
#=== Global Settings ===
[global]
workgroup = MYGROUP
server string = Samba Server Version %v
log file = /var/log/samba/log.%m
max log size = 50
security = share # ( 3 setting : user, share, domain )
passdb backend = tdbsam
load printers = yes
cups options = raw
follow symlinks = yes
wide links = yes
unix extensions = no
interfaces = lan0 192.168.100.1
#=== Share Definitions ===
[temp]
comment = Temporary file space
path = /tmp
writable = yes
browseable = yes
public = yes
[WWW]
comment = Temporary file space
path = /fss/gw/usr/www/
writable = yes
browseable = yes
public = yes
6. Add nobody into passwd
vim /etc/passwd
root:x:0:0:root:/:/bin/sh
nobody:x:99:99:Nobody:/:/bin/sh
7. Start Samba
/usr/sbin/nmbd -D
/usr/sbin/smbd -D
Reference:
0 意見:
張貼留言