Select open package
Edit package
Select Diameter size
Go to brd.
Select device library -> update all.
[EAGLE PCB Design] Change pin size
Select open package
Edit package
Select Diameter size
Go to brd.
Select device library -> update all.
2014年11月25日 星期二
Select open package
Edit package
Select Diameter size
Go to brd.
Select device library -> update all.
2014年11月10日 星期一
[EAGLE PCB Design] Skip move crash
1. First choose select group
2. Select which component want to select
3. Click Move button
Move cursor to component, and right click mouse. Choose Move group then skip crash.
2014年11月7日 星期五
[EAGLE PCB Design] Create PCB board skill
[EAGLE PCB Design] Create PCB board skill
After exposure, the board look like below.
On Eagle design, the line width is 0.8128.
Maybe I can draw more thick.
If some line are not clear, use pan like below to draw the line again.
Please don't sink in etchant too long, otherwise the line will disappear.
Testing the PCB board.
After exposure, the board look like below.
On Eagle design, the line width is 0.8128.
Maybe I can draw more thick.
If some line are not clear, use pan like below to draw the line again.
Please don't sink in etchant too long, otherwise the line will disappear.
Testing the PCB board.
[EAGLE PCB Design] Change different display at brd
At User interface to choose different display.
[EAGLE PCB Design] PCB Board setting
Choose Layer
Choose different PCB type.
Because We just have one side.
Please change Setup to 16.
Reference:
[EAGLE PCB Design] Search IC
Press Ctrl-F to search IC name(74LS595).
[EAGLE PCB Design] Group Delete sch
Choose square and choose which part of sch want to move.
Choose group to move
[EAGLE PCB Design] Group Delete sch
Choose square and choose which part of sch want to delete.
Choose group to delete
Choose group to delete
2014年11月3日 星期一
[EAGLE PCB Design] Draw a line on the brd
Press Route button to draw a line between point to line.
After draw the line, the original line will disappear.
After draw the line, the original line will disappear.
[EAGLE PCB Design] Add resistor component into sch
Type “R-US” to search resistor.
Press Line button to draw a line.
Press junction button to let the line joint together.
[EAGLE PCB Design] Add 74HC595N component into sch
1. Press [add] button
1. Choose “74HC595N” and press OK.
1. Choose “74HC595N” and press OK.
2014年10月22日 星期三
訂閱：
文章 (Atom)
