Add
subdir-y += $(TARGET_HOME)/Porting/Source/APP/Software_Module/Samba/src
2. touch Makefile at the same directory of samba-3.0.23.
# *************************************************************************
# * Makefile Wrapper file for building IP Tables
# *************************************************************************
#include $(TARGET_HOME)/TI_Build.make
#include $(TARGET_HOME)/.config
include $(COMPONENT_PREFIX)/build/gw_config.make
TARGET := samba
PACKAGE_VERSION := samba-3.0.23
PACKAGE_DIR := samba-3.0.23/source
PACKAGE_CONF := \
--host=$(patsubst %-gcc,%,$(CROSS)gcc) \
--disable-cups \
--disable-iprint \
--prefix=/ \
--without-ldap \
--without-ads \
--enable-shared \
--disable-pie \
--cache-file=config.cache \
--bindir=/usr/bin \
--sbindir=/sbin \
--datadir=/nvram \
--sysconfdir=/etc/samba \
--localstatedir=/var \
--libdir=/lib \
--with-privatedir=/nvram \
--with-configdir=/etc/samba \
--disable-largefile \
--enable-swat=no \
--enable-iprint=no \
--enable-fam=no \
--enable-dnssd=no \
--with-libtalloc=no \
--with-libtdb=no \
--with-libnetapi=no \
--with-libaddns=no \
--with-acl-support=no samba_cv_CC_NEGATIVE_ENUM_VALUES=yes \
libreplace_cv_HAVE_GETADDRINFO=no
first_rule: all
all: build
$(CURDIR)/$(PACKAGE_DIR)/Makefile:
@cd $(CURDIR)/$(PACKAGE_DIR) && CC=$(CROSS)gcc ./configure $(PACKAGE_CONF)
build_lib: $(CURDIR)/$(PACKAGE_DIR)/Makefile
@$(MAKE) -pie-C $(CURDIR)/$(PACKAGE_DIR) all
build: build_lib install_rule
config_rule:
install_rule:
@if [ $(PRODUCT_NAME) = dgwsdk ] ; then \
mkdir -p $(TARGET_HOME)/build/dgwsdk/fs/base_fs/usr/local/samba/var \
mkdir -p $(TARGET_HOME)/build/dgwsdk/fs/base_fs/usr/local/samba/private ;\
mkdir -p $(TARGET_HOME)/build/dgwsdk/fs/base_fs/usr/local/samba/lib ;\
cp -af $(PACKAGE_DIR)/bin/smbd $(TARGET_HOME)/build/dgwsdk/fs/base_fs/usr/sbin ;\
cp -af $(PACKAGE_DIR)/bin/nmbd $(TARGET_HOME)/build/dgwsdk/fs/base_fs/usr/sbin ;\
cp -af $(PACKAGE_DIR)/bin/smbpasswd $(TARGET_HOME)/build/dgwsdk/fs/base_fs/usr/bin ;\
cp -af $(PACKAGE_DIR)/bin/mount.cifs $(TARGET_HOME)/build/dgwsdk/fs/base_fs/usr/sbin ;\
cp -af $(PACKAGE_DIR)/bin/umount.cifs $(TARGET_HOME)/build/dgwsdk/fs/base_fs/usr/sbin ;\
else \
mkdir -p $(TARGET_HOME)/build/vgwsdk/fs/base_fs/usr/local/samba/var ;\
mkdir -p $(TARGET_HOME)/build/vgwsdk/fs/base_fs/usr/local/samba/private ;\
mkdir -p $(TARGET_HOME)/build/vgwsdk/fs/base_fs/usr/local/samba/lib ;\
cp -af $(PACKAGE_DIR)/bin/smbd $(TARGET_HOME)/build/vgwsdk/fs/base_fs/usr/sbin ;\
cp -af $(PACKAGE_DIR)/bin/nmbd $(TARGET_HOME)/build/vgwsdk/fs/base_fs/usr/sbin ;\
cp -af $(PACKAGE_DIR)/bin/smbpasswd $(TARGET_HOME)/build/vgwsdk/fs/base_fs/usr/bin ;\
cp -af $(PACKAGE_DIR)/bin/mount.cifs $(TARGET_HOME)/build/vgwsdk/fs/base_fs/usr/sbin ;\
cp -af $(PACKAGE_DIR)/bin/umount.cifs $(TARGET_HOME)/build/vgwsdk/fs/base_fs/usr/sbin ;\
fi
clean_rule:
uninstall_rule:
red line :
indicate binary file put at which place.
**********************************************************************************************
3. under samba-3.0.23/source have another Makefile.
PACKAGE_DIR of step 2 indicate which is another Makefile.
#########################################################################
# Makefile.in for Samba - rewritten for autoconf support
# Copyright Andrew Tridgell 1992-1998
# Copyright (C) 2001 by Martin Pool <mbp@samba.org>
# Copyright Andrew Bartlett 2002
# Copyright (C) 2003 Jim McDonough <jmcd@us.ibm.com>
# Copyright (C) 2002-2003 Jelmer Vernooij <jelmer@samba.org>
# Copyright (C) 2006 Lars Mueller <lars@samba.org>
###########################################################################
prefix=/
exec_prefix=${prefix}
selftest_prefix=./
smbtorture4_path=
LIBS= -lcrypt -lresolv -ldl
CC=armeb-unknown-linux-uclibcgnueabi-gcc
SHLD=${CC} ${CFLAGS}
CFLAGS= -I$(TARGET_HOME)/ti/include -I$(TARGET_HOME)/ti/include/asm-arm/arch-avalanche/generic -I$(TARGET_HOME)/ti/include/masdk -mthumb -mthumb-interwork -I$(TARGET_HOME)/ti/include -I$(TARGET_HOME)/ti/include/asm-arm/arch-avalanche/generic -I$(TARGET_HOME)/ti/include/masdk -mthumb -mthumb-interwork -I$(TARGET_HOME)/ti/include -I$(TARGET_HOME)/ti/include/asm-arm/arch-avalanche/generic -I$(TARGET_HOME)/ti/include/masdk -mthumb -mthumb-interwork -D_SAMBA_BUILD_
CPPFLAGS=-DHAVE_CONFIG_H
EXEEXT=
LDFLAGS= -L$(TARGET_HOME)/ti/lib -L$(TARGET_HOME)/build/dgwsdk/fs/base_fs/lib -L$(TARGET_HOME)/ti/lib -L$(TARGET_HOME)/build/dgwsdk/fs/base_fs/lib -L$(TARGET_HOME)/ti/lib -L$(TARGET_HOME)/build/dgwsdk/fs/gw/lib
AR=armeb-unknown-linux-uclibcgnueabi-ar
LDSHFLAGS=-shared -Wl,-Bsymbolic -L$(TARGET_HOME)/ti/lib -L$(TARGET_HOME)/build/dgwsdk/fs/base_fs/lib -L$(TARGET_HOME)/ti/lib -L$(TARGET_HOME)/build/dgwsdk/fs/base_fs/lib -L$(TARGET_HOME)/ti/lib -L$(TARGET_HOME)/build/dgwsdk/fs/gw/lib
WINBIND_NSS_LDSHFLAGS=-shared -Wl,-Bsymbolic -L$(TARGET_HOME)/ti/lib -L$(TARGET_HOME)/build/dgwsdk/fs/base_fs/lib -L$(TARGET_HOME)/ti/lib -L$(TARGET_HOME)/build/dgwsdk/fs/base_fs/lib -L$(TARGET_HOME)/ti/lib -L$(TARGET_HOME)/build/dgwsdk/fs/gw/lib
AWK=gawk
DYNEXP=-Wl,--export-dynamic
PYTHON=
PERL=/usr/bin/perl
TERMLDFLAGS=
TERMLIBS=
PRINT_LIBS=
AUTH_LIBS=-lcrypt
ACL_LIBS=
PASSDB_LIBS=
IDMAP_LIBS=
KRB5LIBS=
LDAP_LIBS=
NSCD_LIBS=
INSTALLCMD=/usr/bin/install -c
INSTALLLIBCMD_SH=$(INSTALLCMD)
INSTALLLIBCMD_A=:
UNINSTALLLIBCMD_SH=rm -f
UNINSTALLLIBCMD_A=:
srcdir=$(TARGET_HOME)/Porting/Source/APP/Software_Module/Samba/src/samba-3.0.23/source
builddir=$(TARGET_HOME)/Porting/Source/APP/Software_Module/Samba/src/samba-3.0.23/source
SHELL=/bin/sh
DESTDIR=/
# XXX: Perhaps this should be /bin/sh instead -- apparently autoconf
# will search for a POSIX-compliant shell, and that might not be
# /bin/sh on some platforms. I guess it's not a big problem -- mbp
# See the autoconf manual "Installation Directory Variables" for a
# discussion of the subtle use of these variables.
BASEDIR= /
BINDIR = /usr/bin
# sbindir is mapped to bindir when compiling SAMBA in 2.0.x compatibility mode.
SBINDIR = /sbin
ROOTSBINDIR = ${SBINDIR}
LIBDIR = /lib
PAMMODULESDIR = ${LIBDIR}/security
VFSLIBDIR = $(LIBDIR)/vfs
PDBLIBDIR = $(LIBDIR)/pdb
RPCLIBDIR = $(LIBDIR)/rpc
IDMAPLIBDIR = $(LIBDIR)/idmap
CHARSETLIBDIR = $(LIBDIR)/charset
AUTHLIBDIR = $(LIBDIR)/auth
CONFIGLIBDIR = $(LIBDIR)/config
CONFIGDIR = /etc/samba
VARDIR = /var
MANDIR = ${prefix}/man
DATADIR = /nvram/samba
# The permissions to give the executables
INSTALLPERMS = 0755
# set these to where to find various files
# These can be overridden by command line switches (see smbd(8))
# or in smb.conf (see smb.conf(5))
LOGFILEBASE = ${VARDIR}
CONFIGFILE = $(CONFIGDIR)/smb.conf
LMHOSTSFILE = $(CONFIGDIR)/lmhosts
# This is where smbpasswd et al go
PRIVATEDIR = /nvram/samba/private
SMB_PASSWD_FILE = $(PRIVATEDIR)/smbpasswd
PRIVATE_DIR = $(PRIVATEDIR)
# This is where SWAT images and help files go
SWATDIR = ${prefix}/swat
# the directory where lock files go
LOCKDIR = ${VARDIR}/locks
# the directory where pid files go
PIDDIR = ${VARDIR}/locks
LIBSMBCLIENT=bin/libsmbclient.a bin/libsmbclient.so
LIBSMBCLIENT_MAJOR=0
LIBSMBCLIENT_MINOR=1
LIBMSRPC=bin/libmsrpc.a bin/libmsrpc.so
LIBMSRPC_MAJOR=0
LIBMSRPC_MINOR=1
LIBSMBSHAREMODES=bin/libsmbsharemodes.a bin/libsmbsharemodes.so
LIBSMBSHAREMODES_MAJOR=0
LIBSMBSHAREMODES_MINOR=2
FLAGS1 = $(CFLAGS) -I$(srcdir)/popt -Iinclude -I$(srcdir)/include -I$(srcdir)/tdb -I. $(CPPFLAGS) -I$(srcdir) -D_SAMBA_BUILD_
FLAGS2 =
FLAGS3 =
FLAGS4 =
FLAGS5 = $(FLAGS1) $(FLAGS2) $(FLAGS3) $(FLAGS4)
FLAGS = $(ISA) $(FLAGS5)
PASSWD_FLAGS = -DSMB_PASSWD_FILE=\"$(SMB_PASSWD_FILE)\" -DPRIVATE_DIR=\"$(PRIVATE_DIR)\"
PATH_FLAGS1 = -DCONFIGFILE=\"$(CONFIGFILE)\" -DSBINDIR=\"$(SBINDIR)\"
PATH_FLAGS2 = $(PATH_FLAGS1) -DBINDIR=\"$(BINDIR)\" -DDRIVERFILE=\"$(DRIVERFILE)\"
PATH_FLAGS3 = $(PATH_FLAGS2) -DLMHOSTSFILE=\"$(LMHOSTSFILE)\"
PATH_FLAGS4 = $(PATH_FLAGS3) -DSWATDIR=\"$(SWATDIR)\" -DLOCKDIR=\"$(LOCKDIR)\" -DPIDDIR=\"$(PIDDIR)\"
PATH_FLAGS5 = $(PATH_FLAGS4) -DLIBDIR=\"$(LIBDIR)\" \
-DLOGFILEBASE=\"$(LOGFILEBASE)\" -DSHLIBEXT=\"so\"
PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\"
PATH_FLAGS = $(PATH_FLAGS6) $(PASSWD_FLAGS)
# Note that all executable programs now provide for an optional executable suffix.
SBIN_PROGS = bin/smbd bin/nmbd bin/swat bin/winbindd$(EXEEXT)
ROOT_SBIN_PROGS = bin/mount.cifs bin/umount.cifs
BIN_PROGS1 = bin/smbclient bin/net bin/smbspool \
bin/testparm bin/smbstatus bin/smbget
BIN_PROGS2 = bin/smbcontrol bin/smbtree bin/tdbbackup \
bin/nmblookup bin/pdbedit bin/tdbdump \
bin/tdbtool
BIN_PROGS3 = bin/smbpasswd bin/rpcclient bin/smbcacls \
bin/profiles bin/ntlm_auth \
bin/smbcquotas bin/eventlogadm
TORTURE_PROGS = bin/smbtorture bin/msgtest \
bin/masktest bin/locktest \
bin/locktest2 bin/nsstest bin/vfstest
BIN_PROGS = $(BIN_PROGS1) $(BIN_PROGS2) $(BIN_PROGS3) bin/wbinfo$(EXEEXT)
EVERYTHING_PROGS = bin/debug2html bin/smbfilter bin/talloctort \
bin/log2pcap
SHLIBS = nsswitch/libnss_winbind.so nsswitch/libnss_wins.so libsmbclient libsmbsharemodes libmsrpc
PAM_MODULES =
SCRIPTS = $(srcdir)/script/smbtar $(builddir)/script/findsmb
VFS_MODULES = bin/recycle.so bin/audit.so bin/extd_audit.so bin/full_audit.so bin/netatalk.so bin/fake_perms.so bin/default_quota.so bin/readonly.so bin/cap.so bin/expand_msdfs.so bin/shadow_copy.so
PDB_MODULES =
RPC_MODULES =
IDMAP_MODULES =
CHARSET_MODULES = bin/CP850.so bin/CP437.so
AUTH_MODULES = bin/script.so
MODULES = $(VFS_MODULES) $(PDB_MODULES) $(RPC_MODULES) $(IDMAP_MODULES) $(CHARSET_MODULES) $(AUTH_MODULES)
######################################################################
# object file lists
######################################################################
TDBBASE_OBJ = tdb/tdb.o tdb/spinlock.o
TDB_OBJ = $(TDBBASE_OBJ) tdb/tdbutil.o tdb/tdbback.o
SMBLDAP_OBJ =
VERSION_OBJ = lib/version.o
DOSERR_OBJ = libsmb/doserr.o
SNPRINTF_OBJ = lib/snprintf.o
WBCOMMON_OBJ = nsswitch/wb_common.o
AFS_OBJ = lib/afs.o
AFS_SETTOKEN_OBJ = lib/afs_settoken.o
SERVER_MUTEX_OBJ = lib/server_mutex.o
ERRORMAP_OBJ = libsmb/errormap.o
PASSCHANGE_OBJ = libsmb/passchange.o
SOCKET_WRAPPER_OBJ = lib/socket_wrapper.o
RPC_PARSE_OBJ0 = rpc_parse/parse_prs.o rpc_parse/parse_misc.o
LIB_OBJ = $(VERSION_OBJ) lib/charcnv.o lib/debug.o lib/fault.o \
lib/getsmbpass.o lib/interface.o lib/md4.o \
lib/interfaces.o lib/pidfile.o lib/replace.o lib/replace1.o lib/repdir.o lib/timegm.o \
lib/signal.o lib/system.o lib/sendfile.o lib/time.o \
lib/ufc.o lib/genrand.o lib/username.o \
lib/util_pw.o lib/access.o lib/smbrun.o \
lib/bitmap.o lib/crc32.o $(SNPRINTF_OBJ) lib/dprintf.o \
lib/xfile.o lib/wins_srv.o \
lib/util_str.o lib/clobber.o lib/util_sid.o lib/util_uuid.o \
lib/util_unistr.o lib/util_file.o lib/data_blob.o \
lib/util.o lib/util_sock.o lib/sock_exec.o lib/util_sec.o \
lib/talloc.o lib/substitute.o lib/fsusage.o \
lib/ms_fnmatch.o lib/select.o lib/messages.o \
lib/tallocmsg.o lib/dmallocmsg.o libsmb/smb_signing.o \
lib/md5.o lib/hmacmd5.o lib/arc4.o lib/iconv.o \
nsswitch/wb_client.o $(WBCOMMON_OBJ) \
lib/pam_errors.o intl/lang_tdb.o \
lib/adt_tree.o lib/gencache.o $(TDB_OBJ) \
lib/module.o lib/events.o lib/ldap_escape.o \
lib/secdesc.o lib/util_seaccess.o lib/secace.o lib/secacl.o \
libads/krb5_errs.o lib/system_smbd.o lib/audit.o
LIB_DUMMY_OBJ = lib/dummysmbd.o lib/dummyroot.o
LIB_NONSMBD_OBJ = $(LIB_OBJ) $(LIB_DUMMY_OBJ)
READLINE_OBJ = lib/readline.o
# Also depends on $(SECRETS_OBJ) $(LIBSAMBA_OBJ)
# Be sure to include them into your application
POPT_LIB_OBJ = lib/popt_common.o
PARAM_OBJ = dynconfig.o param/loadparm.o param/params.o lib/sharesec.o
KRBCLIENT_OBJ = libads/kerberos.o libads/ads_status.o
LIBADS_OBJ = libads/ldap.o libads/ldap_printer.o libads/sasl.o \
libads/krb5_setpw.o libads/ldap_user.o \
libads/ads_struct.o libads/kerberos_keytab.o \
libads/disp_sec.o libads/ads_utils.o libads/ldap_utils.o \
libads/authdata.o libads/cldap.o
LIBADS_SERVER_OBJ = libads/util.o libads/kerberos_verify.o \
libads/ldap_schema.o sam/nss_info.o
SECRETS_OBJ = passdb/secrets.o passdb/machine_sid.o
LIBNMB_OBJ = libsmb/unexpected.o libsmb/namecache.o libsmb/nmblib.o \
libsmb/namequery.o libsmb/conncache.o libads/dns.o
LIBSAMBA_OBJ = libsmb/nterr.o libsmb/dcerpc_err.o libsmb/smbdes.o \
libsmb/smbencrypt.o libsmb/ntlm_check.o \
libsmb/ntlmssp.o libsmb/ntlmssp_parse.o libsmb/ntlmssp_sign.o
LIBSMB_OBJ = libsmb/clientgen.o libsmb/cliconnect.o libsmb/clifile.o \
libsmb/clikrb5.o libsmb/clispnego.o libsmb/asn1.o \
libsmb/clirap.o libsmb/clierror.o libsmb/climessage.o \
libsmb/clireadwrite.o libsmb/clilist.o libsmb/cliprint.o \
libsmb/clitrans.o libsmb/clisecdesc.o libsmb/clidgram.o \
libsmb/clistr.o libsmb/cliquota.o libsmb/clifsinfo.o libsmb/clidfs.o \
libsmb/smberr.o libsmb/credentials.o libsmb/pwd_cache.o \
libsmb/clioplock.o $(ERRORMAP_OBJ) libsmb/clirap2.o \
$(DOSERR_OBJ) \
$(RPC_PARSE_OBJ1) $(LIBSAMBA_OBJ) $(LIBNMB_OBJ)
LIBMSRPC_OBJ = rpc_client/cli_lsarpc.o rpc_client/cli_samr.o \
rpc_client/cli_netlogon.o rpc_client/cli_srvsvc.o \
rpc_client/cli_wkssvc.o rpc_client/cli_dfs.o \
rpc_client/cli_reg.o $(RPC_CLIENT_OBJ) \
rpc_client/cli_spoolss.o rpc_client/cli_spoolss_notify.o \
rpc_client/cli_ds.o rpc_client/cli_echo.o \
rpc_client/cli_shutdown.o rpc_client/cli_svcctl.o
REGOBJS_OBJ = registry/reg_objects.o
REGISTRY_OBJ = registry/reg_frontend.o registry/reg_cachehook.o registry/reg_printing.o \
registry/reg_db.o registry/reg_eventlog.o registry/reg_shares.o \
registry/reg_util.o registry/reg_dynamic.o registry/reg_perfcount.o
RPC_LSA_OBJ = rpc_server/srv_lsa.o rpc_server/srv_lsa_nt.o
RPC_NETLOG_OBJ = rpc_server/srv_netlog.o rpc_server/srv_netlog_nt.o
RPC_SAMR_OBJ = rpc_server/srv_samr.o rpc_server/srv_samr_nt.o \
rpc_server/srv_samr_util.o
REGFIO_OBJ = registry/regfio.o
RPC_REG_OBJ = rpc_server/srv_reg.o rpc_server/srv_reg_nt.o $(REGFIO_OBJ)
RPC_LSA_DS_OBJ = rpc_server/srv_lsa_ds.o rpc_server/srv_lsa_ds_nt.o
RPC_SVC_OBJ = rpc_server/srv_srvsvc.o rpc_server/srv_srvsvc_nt.o
RPC_WKS_OBJ = rpc_server/srv_wkssvc.o rpc_server/srv_wkssvc_nt.o
RPC_SVCCTL_OBJ = rpc_server/srv_svcctl.o rpc_server/srv_svcctl_nt.o \
services/svc_spoolss.o services/svc_rcinit.o services/services_db.o \
services/svc_netlogon.o services/svc_winreg.o \
services/svc_wins.o
RPC_NTSVCS_OBJ = rpc_server/srv_ntsvcs.o rpc_server/srv_ntsvcs_nt.o
RPC_DFS_OBJ = rpc_server/srv_dfs.o rpc_server/srv_dfs_nt.o
RPC_SPOOLSS_OBJ = rpc_server/srv_spoolss.o rpc_server/srv_spoolss_nt.o
RPC_EVENTLOG_OBJ = rpc_server/srv_eventlog.o rpc_server/srv_eventlog_nt.o rpc_server/srv_eventlog_lib.o
RPC_PIPE_OBJ = rpc_server/srv_pipe_hnd.o \
rpc_server/srv_pipe.o rpc_server/srv_lsa_hnd.o
RPC_ECHO_OBJ = rpc_server/srv_echo.o rpc_server/srv_echo_nt.o
RPC_SERVER_OBJ = $(RPC_LSA_OBJ) $(RPC_REG_OBJ) $(RPC_LSA_DS_OBJ) $(RPC_WKS_OBJ) $(RPC_SVCCTL_OBJ) $(RPC_NTSVCS_OBJ) $(RPC_NETLOG_OBJ) $(RPC_DFS_OBJ) $(RPC_SVC_OBJ) $(RPC_SPOOLSS_OBJ) $(RPC_EVENTLOG_OBJ) $(RPC_SAMR_OBJ) $(RPC_PIPE_OBJ)
# this includes only the low level parse code, not stuff
# that requires knowledge of security contexts
RPC_PARSE_OBJ1 = $(RPC_PARSE_OBJ0) rpc_parse/parse_sec.o
RPC_PARSE_OBJ = rpc_parse/parse_lsa.o rpc_parse/parse_net.o \
rpc_parse/parse_reg.o rpc_parse/parse_rpc.o \
rpc_parse/parse_samr.o rpc_parse/parse_srv.o \
rpc_parse/parse_wks.o rpc_parse/parse_ds.o \
rpc_parse/parse_spoolss.o rpc_parse/parse_dfs.o \
rpc_parse/parse_echo.o rpc_parse/parse_shutdown.o \
rpc_parse/parse_svcctl.o \
rpc_parse/parse_eventlog.o rpc_parse/parse_buffer.o \
rpc_parse/parse_ntsvcs.o $(REGOBJS_OBJ)
RPC_CLIENT_OBJ = rpc_client/cli_pipe.o
LOCKING_OBJ = locking/locking.o locking/brlock.o locking/posix.o
PASSDB_GET_SET_OBJ = passdb/pdb_get_set.o
PASSDB_OBJ = $(PASSDB_GET_SET_OBJ) passdb/passdb.o passdb/pdb_interface.o \
passdb/util_wellknown.o passdb/util_builtin.o passdb/pdb_compat.o \
passdb/util_unixsids.o passdb/lookup_sid.o \
passdb/login_cache.o passdb/pdb_smbpasswd.o passdb/pdb_tdb.o \
lib/account_pol.o lib/privileges.o lib/util_nscd.o
DEVEL_HELP_WEIRD_OBJ = modules/weird.o
CP850_OBJ = modules/CP850.o
CP437_OBJ = modules/CP437.o
CHARSET_MACOSXFS_OBJ = modules/charset_macosxfs.o
GROUPDB_OBJ = groupdb/mapping.o
PROFILE_OBJ = profile/profile.o
PROFILES_OBJ = utils/profiles.o \
$(REGFIO_OBJ) $(REGOBJS_OBJ) $(ERRORMAP_OBJ) \
$(RPC_PARSE_OBJ1) $(PARAM_OBJ) $(LIBSAMBA_OBJ) \
$(DOSERR_OBJ) $(LIB_OBJ) $(LIB_DUMMY_OBJ) \
$(POPT_LIB_OBJ) $(SECRETS_OBJ)
OPLOCK_OBJ = smbd/oplock.o smbd/oplock_irix.o smbd/oplock_linux.o
NOTIFY_OBJ = smbd/notify.o smbd/notify_hash.o smbd/notify_kernel.o smbd/notify_fam.o
VFS_AUDIT_OBJ = modules/vfs_audit.o
VFS_EXTD_AUDIT_OBJ = modules/vfs_extd_audit.o
VFS_FULL_AUDIT_OBJ = modules/vfs_full_audit.o
VFS_FAKE_PERMS_OBJ = modules/vfs_fake_perms.o
VFS_RECYCLE_OBJ = modules/vfs_recycle.o
VFS_NETATALK_OBJ = modules/vfs_netatalk.o
VFS_DEFAULT_QUOTA_OBJ = modules/vfs_default_quota.o
VFS_READONLY_OBJ = modules/vfs_readonly.o modules/getdate.o
VFS_CAP_OBJ = modules/vfs_cap.o
VFS_EXPAND_MSDFS_OBJ = modules/vfs_expand_msdfs.o
VFS_SHADOW_COPY_OBJ = modules/vfs_shadow_copy.o
VFS_AFSACL_OBJ = modules/vfs_afsacl.o
VFS_CATIA_OBJ = modules/vfs_catia.o
PLAINTEXT_AUTH_OBJ = auth/pampass.o auth/pass_check.o
SLCACHE_OBJ = libsmb/samlogon_cache.o
DCUTIL_OBJ = libsmb/namequery_dc.o libsmb/trustdom_cache.o libsmb/trusts_util.o
AUTH_BUILTIN_OBJ = auth/auth_builtin.o
AUTH_DOMAIN_OBJ = auth/auth_domain.o
AUTH_SAM_OBJ = auth/auth_sam.o
AUTH_SERVER_OBJ = auth/auth_server.o
AUTH_UNIX_OBJ = auth/auth_unix.o
AUTH_WINBIND_OBJ = auth/auth_winbind.o
AUTH_SCRIPT_OBJ = auth/auth_script.o
AUTH_OBJ = auth/auth.o $(AUTH_SAM_OBJ) $(AUTH_UNIX_OBJ) $(AUTH_WINBIND_OBJ) $(AUTH_SERVER_OBJ) $(AUTH_DOMAIN_OBJ) $(AUTH_BUILTIN_OBJ) auth/auth_util.o auth/auth_compat.o \
auth/auth_ntlmssp.o \
$(PLAINTEXT_AUTH_OBJ) $(SLCACHE_OBJ) $(DCUTIL_OBJ)
MANGLE_OBJ = smbd/mangle.o smbd/mangle_hash.o smbd/mangle_map.o smbd/mangle_hash2.o
SMBD_OBJ_MAIN = smbd/server.o
BUILDOPT_OBJ = smbd/build_options.o
SMBD_OBJ_SRV = smbd/files.o smbd/chgpasswd.o smbd/connection.o \
smbd/utmp.o smbd/session.o smbd/map_username.o \
smbd/dfree.o smbd/dir.o smbd/password.o smbd/conn.o \
smbd/share_access.o smbd/fileio.o \
smbd/ipc.o smbd/lanman.o smbd/negprot.o \
smbd/message.o smbd/nttrans.o smbd/pipes.o \
smbd/reply.o smbd/sesssetup.o smbd/trans2.o smbd/uid.o \
smbd/dosmode.o smbd/filename.o smbd/open.o smbd/close.o \
smbd/blocking.o smbd/sec_ctx.o smbd/srvstr.o \
smbd/vfs.o smbd/vfs-wrap.o smbd/statcache.o \
smbd/posix_acls.o lib/sysacls.o $(SERVER_MUTEX_OBJ) \
smbd/process.o smbd/service.o smbd/error.o \
printing/printfsp.o lib/sysquotas.o lib/sysquotas_linux.o \
lib/sysquotas_xfs.o lib/sysquotas_4A.o \
smbd/change_trust_pw.o smbd/fake_file.o \
smbd/quotas.o smbd/ntquotas.o $(AFS_OBJ) smbd/msdfs.o \
$(AFS_SETTOKEN_OBJ) smbd/aio.o smbd/statvfs.o \
smbd/dmapi.o $(MANGLE_OBJ)
SMBD_OBJ_BASE = $(PARAM_OBJ) $(SMBD_OBJ_SRV) $(LIBSMB_OBJ) \
$(RPC_SERVER_OBJ) $(RPC_PARSE_OBJ) $(SECRETS_OBJ) \
$(LOCKING_OBJ) $(PASSDB_OBJ) $(PRINTING_OBJ) $(PROFILE_OBJ) \
$(LIB_OBJ) $(PRINTBACKEND_OBJ) $(OPLOCK_OBJ) \
$(NOTIFY_OBJ) $(GROUPDB_OBJ) $(AUTH_OBJ) \
$(LIBMSRPC_OBJ) \
$(LIBADS_OBJ) $(KRBCLIENT_OBJ) $(LIBADS_SERVER_OBJ) \
$(REGISTRY_OBJ) $(POPT_LIB_OBJ) \
$(BUILDOPT_OBJ) $(SMBLDAP_OBJ)
PRINTING_OBJ = printing/pcap.o printing/print_svid.o printing/print_aix.o \
printing/print_cups.o printing/print_generic.o \
printing/lpq_parse.o printing/load.o \
printing/print_iprint.o
PRINTBASE_OBJ = printing/notify.o printing/printing_db.o
PRINTBACKEND_OBJ = printing/printing.o printing/nt_printing.o $(PRINTBASE_OBJ)
SMBD_OBJ = $(SMBD_OBJ_BASE) $(SMBD_OBJ_MAIN)
NMBD_OBJ1 = nmbd/asyncdns.o nmbd/nmbd.o nmbd/nmbd_become_dmb.o \
nmbd/nmbd_become_lmb.o nmbd/nmbd_browserdb.o \
nmbd/nmbd_browsesync.o nmbd/nmbd_elections.o \
nmbd/nmbd_incomingdgrams.o nmbd/nmbd_incomingrequests.o \
nmbd/nmbd_lmhosts.o nmbd/nmbd_logonnames.o nmbd/nmbd_mynames.o \
nmbd/nmbd_namelistdb.o nmbd/nmbd_namequery.o \
nmbd/nmbd_nameregister.o nmbd/nmbd_namerelease.o \
nmbd/nmbd_nodestatus.o nmbd/nmbd_packets.o \
nmbd/nmbd_processlogon.o nmbd/nmbd_responserecordsdb.o \
nmbd/nmbd_sendannounce.o nmbd/nmbd_serverlistdb.o \
nmbd/nmbd_subnetdb.o nmbd/nmbd_winsproxy.o nmbd/nmbd_winsserver.o \
nmbd/nmbd_workgroupdb.o nmbd/nmbd_synclists.o
NMBD_OBJ = $(NMBD_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
$(PROFILE_OBJ) $(LIB_NONSMBD_OBJ) $(SECRETS_OBJ) $(POPT_LIB_OBJ)
SWAT_OBJ1 = web/cgi.o web/diagnose.o web/startstop.o web/statuspage.o \
web/swat.o web/neg_lang.o
SWAT_OBJ = $(SWAT_OBJ1) $(PARAM_OBJ) $(PRINTING_OBJ) $(LIBSMB_OBJ) \
$(LOCKING_OBJ) $(PASSDB_OBJ) $(SECRETS_OBJ) $(KRBCLIENT_OBJ) \
$(LIB_NONSMBD_OBJ) $(GROUPDB_OBJ) $(PLAINTEXT_AUTH_OBJ) \
$(POPT_LIB_OBJ) $(SMBLDAP_OBJ) $(RPC_PARSE_OBJ) $(LIBMSRPC_OBJ) \
$(PASSCHANGE_OBJ)
SMBSH_OBJ = smbwrapper/smbsh.o smbwrapper/shared.o \
$(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(RPC_PARSE_OBJ1) $(LIBSAMBA_OBJ) \
$(DOSERR_OBJ) $(SECRETS_OBJ)
STATUS_OBJ = utils/status.o $(LOCKING_OBJ) $(PARAM_OBJ) \
$(PROFILE_OBJ) $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) \
$(SECRETS_OBJ) $(LIBSAMBA_OBJ) $(ERRORMAP_OBJ) $(RPC_PARSE_OBJ1) \
$(DOSERR_OBJ)
SMBCONTROL_OBJ = utils/smbcontrol.o $(LOCKING_OBJ) $(PARAM_OBJ) \
$(PROFILE_OBJ) $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) \
$(SECRETS_OBJ) $(LIBSAMBA_OBJ) $(RPC_PARSE_OBJ1) $(DOSERR_OBJ) \
$(PRINTBASE_OBJ) $(ERRORMAP_OBJ)
SMBTREE_OBJ = utils/smbtree.o $(PARAM_OBJ) \
$(PROFILE_OBJ) $(LIB_NONSMBD_OBJ) $(LIBSMB_OBJ) \
$(KRBCLIENT_OBJ) $(POPT_LIB_OBJ) $(SECRETS_OBJ) \
rpc_client/cli_srvsvc.o rpc_parse/parse_srv.o \
rpc_client/cli_pipe.o rpc_parse/parse_rpc.o \
rpc_client/cli_netlogon.o rpc_parse/parse_net.o
TESTPARM_OBJ = utils/testparm.o \
$(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) \
$(SECRETS_OBJ) $(LIBSAMBA_OBJ) $(RPC_PARSE_OBJ1) $(DOSERR_OBJ)
SMBPASSWD_OBJ = utils/smbpasswd.o utils/passwd_util.o $(PASSCHANGE_OBJ) \
$(PARAM_OBJ) $(SECRETS_OBJ) $(LIBSMB_OBJ) $(PASSDB_OBJ) \
$(GROUPDB_OBJ) $(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ) \
$(POPT_LIB_OBJ) $(SMBLDAP_OBJ) $(RPC_PARSE_OBJ) $(LIBMSRPC_OBJ)
PDBEDIT_OBJ = utils/pdbedit.o utils/passwd_util.o $(PARAM_OBJ) $(PASSDB_OBJ) \
$(LIBSAMBA_OBJ) $(LIB_NONSMBD_OBJ) $(GROUPDB_OBJ) \
$(SECRETS_OBJ) $(POPT_LIB_OBJ) $(SMBLDAP_OBJ) libsmb/asn1.o \
$(RPC_PARSE_OBJ1) $(DOSERR_OBJ)
SMBGET_OBJ = utils/smbget.o $(POPT_LIB_OBJ) $(LIBSMBCLIENT_OBJ)
RPCCLIENT_OBJ1 = rpcclient/rpcclient.o rpcclient/cmd_lsarpc.o \
rpcclient/cmd_samr.o rpcclient/cmd_spoolss.o \
rpcclient/cmd_netlogon.o rpcclient/cmd_srvsvc.o \
rpcclient/cmd_dfs.o rpcclient/cmd_reg.o \
rpcclient/cmd_ds.o rpcclient/cmd_echo.o \
rpcclient/cmd_shutdown.o rpcclient/cmd_test.o \
lib/display_sec.o
RPCCLIENT_OBJ = $(RPCCLIENT_OBJ1) \
$(PARAM_OBJ) $(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) \
$(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(LIBMSRPC_OBJ) \
$(READLINE_OBJ) $(GROUPDB_OBJ) $(KRBCLIENT_OBJ) \
$(LIBADS_OBJ) $(SECRETS_OBJ) $(POPT_LIB_OBJ) \
$(SMBLDAP_OBJ) $(DCUTIL_OBJ)
PAM_WINBIND_OBJ = nsswitch/pam_winbind.o $(WBCOMMON_OBJ) \
lib/replace1.o $(SNPRINTF_OBJ)
SMBW_OBJ1 = smbwrapper/smbw.o \
smbwrapper/smbw_dir.o smbwrapper/smbw_stat.o \
smbwrapper/realcalls.o smbwrapper/shared.o \
smbwrapper/smbw_cache.o
SMBW_OBJ = $(SMBW_OBJ1) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(PARAM_OBJ) \
$(LIB_NONSMBD_OBJ)
SMBWRAPPER_OBJ1 = smbwrapper/wrapped.o
SMBWRAPPER_OBJ = $(SMBW_OBJ) $(SMBWRAPPER_OBJ1)
LIBSMBCLIENT_OBJ = libsmb/libsmbclient.o libsmb/libsmb_compat.o \
libsmb/libsmb_cache.o \
$(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
$(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
$(LIBMSRPC_OBJ) $(RPC_PARSE_OBJ) \
$(SECRETS_OBJ) $(PASSDB_OBJ) $(SMBLDAP_OBJ) $(GROUPDB_OBJ)
CAC_OBJ = $(LIBSMBCLIENT_OBJ) \
libmsrpc/libmsrpc.o libmsrpc/libmsrpc_internal.o \
libmsrpc/cac_lsarpc.o libmsrpc/cac_winreg.o libmsrpc/cac_samr.o \
libmsrpc/cac_svcctl.o
LIBSMBSHAREMODES_OBJ = libsmb/smb_share_modes.o tdb/tdb.o tdb/spinlock.o
# This shared library is intended for linking with unit test programs
# to test Samba internals. It's called libbigballofmud.so to
# discourage casual usage.
LIBBIGBALLOFMUD_MAJOR = 0
LIBBIGBALLOFMUD_OBJ = $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(SECRETS_OBJ) \
$(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_OBJ) \
$(GROUPDB_OBJ) $(KRBCLIENT_OBJ) $(SMBLDAP_OBJ)
LIBBIGBALLOFMUD_PICOBJS = $(LIBBIGBALLOFMUD_OBJ:.o=.po)
CLIENT_OBJ1 = client/client.o client/clitar.o rpc_client/cli_srvsvc.o \
rpc_parse/parse_srv.o rpc_client/cli_pipe.o rpc_parse/parse_rpc.o \
rpc_client/cli_netlogon.o rpc_parse/parse_net.o
CLIENT_OBJ = $(CLIENT_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) \
$(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ) \
$(READLINE_OBJ) $(POPT_LIB_OBJ) $(SECRETS_OBJ) \
lib/display_sec.o
TOOL_OBJ = client/smbctool.o client/clitar.o $(PARAM_OBJ) $(LIBSMB_OBJ) \
$(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ) \
$(READLINE_OBJ) $(POPT_LIB_OBJ) $(SECRETS_OBJ)
NET_OBJ1 = utils/net.o utils/net_ads.o utils/net_domain.o utils/net_help.o \
utils/net_rap.o utils/net_rpc.o utils/net_rpc_samsync.o \
utils/net_rpc_join.o utils/net_time.o utils/net_lookup.o \
utils/net_cache.o utils/net_groupmap.o utils/net_idmap.o \
utils/net_status.o utils/net_rpc_printer.o utils/net_rpc_rights.o \
utils/net_rpc_service.o utils/net_rpc_registry.o utils/net_usershare.o \
utils/netlookup.o utils/net_sam.o utils/net_rpc_shell.o \
utils/net_util.o utils/net_rpc_sh_acct.o utils/net_rpc_audit.o \
utils/passwd_util.o
NET_OBJ = $(NET_OBJ1) $(PARAM_OBJ) $(SECRETS_OBJ) $(LIBSMB_OBJ) \
$(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
$(KRBCLIENT_OBJ) $(LIB_NONSMBD_OBJ) \
$(LIBMSRPC_OBJ) $(IDMAP_OBJ) \
$(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) $(POPT_LIB_OBJ) \
$(SMBLDAP_OBJ) $(DCUTIL_OBJ) $(SERVER_MUTEX_OBJ) \
$(AFS_OBJ) $(AFS_SETTOKEN_OBJ) $(REGFIO_OBJ) $(READLINE_OBJ) \
lib/display_sec.o
CUPS_OBJ = client/smbspool.o $(PARAM_OBJ) $(LIBSMB_OBJ) \
$(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ) $(SECRETS_OBJ)
MOUNT_OBJ = client/smbmount.o \
$(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(LIB_NONSMBD_OBJ) $(SECRETS_OBJ)
MNT_OBJ = client/smbmnt.o lib/replace.o lib/timegm.o $(VERSION_OBJ) $(SNPRINTF_OBJ)
UMOUNT_OBJ = client/smbumount.o
CIFS_MOUNT_OBJ = client/mount.cifs.o
CIFS_UMOUNT_OBJ = client/umount.cifs.o
NMBLOOKUP_OBJ = utils/nmblookup.o $(PARAM_OBJ) $(LIBNMB_OBJ) $(RPC_PARSE_OBJ1) $(DOSERR_OBJ) \
$(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) $(SECRETS_OBJ) $(LIBSAMBA_OBJ)
SMBTORTURE_OBJ1 = torture/torture.o torture/nbio.o torture/scanner.o torture/utable.o \
torture/denytest.o torture/mangle_test.o
SMBTORTURE_OBJ = $(SMBTORTURE_OBJ1) $(PARAM_OBJ) \
$(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(LIB_NONSMBD_OBJ) $(SECRETS_OBJ)
MASKTEST_OBJ = torture/masktest.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
$(LIB_NONSMBD_OBJ) $(SECRETS_OBJ)
MSGTEST_OBJ = torture/msgtest.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
$(LIB_NONSMBD_OBJ) $(SECRETS_OBJ)
LOCKTEST_OBJ = torture/locktest.o $(PARAM_OBJ) $(LOCKING_OBJ) $(KRBCLIENT_OBJ) \
$(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) $(SECRETS_OBJ)
NSSTEST_OBJ = torture/nsstest.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
$(LIB_NONSMBD_OBJ) $(SECRETS_OBJ)
VFSTEST_OBJ = torture/cmd_vfs.o torture/vfstest.o $(SMBD_OBJ_BASE) $(READLINE_OBJ)
SMBICONV_OBJ = $(PARAM_OBJ) torture/smbiconv.o $(LIB_NONSMBD_OBJ) $(POPT_LIB_OBJ) $(SECRETS_OBJ) $(LIBSAMBA_OBJ)
LOG2PCAP_OBJ = utils/log2pcaphex.o
LOCKTEST2_OBJ = torture/locktest2.o $(PARAM_OBJ) $(LOCKING_OBJ) $(LIBSMB_OBJ) \
$(KRBCLIENT_OBJ) $(LIB_NONSMBD_OBJ) $(SECRETS_OBJ)
SMBCACLS_OBJ = utils/smbcacls.o $(PARAM_OBJ) $(LIBSMB_OBJ) \
$(KRBCLIENT_OBJ) $(LIB_NONSMBD_OBJ) $(RPC_PARSE_OBJ) \
$(PASSDB_OBJ) $(GROUPDB_OBJ) $(LIBMSRPC_OBJ) $(SECRETS_OBJ) \
$(POPT_LIB_OBJ) $(DCUTIL_OBJ) $(LIBADS_OBJ) $(SMBLDAP_OBJ)
SMBCQUOTAS_OBJ = utils/smbcquotas.o $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
$(PARAM_OBJ) \
$(LIB_NONSMBD_OBJ) $(RPC_PARSE_OBJ) \
$(LIBMSRPC_OBJ) $(SECRETS_OBJ) $(POPT_LIB_OBJ) \
$(PASSDB_OBJ) $(SMBLDAP_OBJ) $(GROUPDB_OBJ)
EVTLOGADM_OBJ0 = utils/eventlogadm.o
EVTLOGADM_OBJ = $(EVTLOGADM_OBJ0) $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(REGOBJS_OBJ) \
$(ERRORMAP_OBJ) $(RPC_PARSE_OBJ1) $(LIBSAMBA_OBJ) $(DOSERR_OBJ) \
$(SECRETS_OBJ) \
registry/reg_eventlog.o rpc_server/srv_eventlog_lib.o registry/reg_util.o \
registry/reg_db.o
TALLOCTORT_OBJ = lib/talloctort.o $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
$(RPC_PARSE_OBJ1) $(DOSERR_OBJ) $(LIBSAMBA_OBJ) $(SECRETS_OBJ)
RPCTORTURE_OBJ = torture/rpctorture.o \
rpcclient/display.o \
rpcclient/cmd_lsarpc.o \
rpcclient/cmd_wkssvc.o \
rpcclient/cmd_samr.o \
rpcclient/cmd_srvsvc.o \
rpcclient/cmd_netlogon.o \
$(PARAM_OBJ) $(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ) \
$(RPC_CLIENT_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_GET_SET_OBJ) $(SECRETS_OBJ)
DEBUG2HTML_OBJ = utils/debug2html.o utils/debugparse.o
SMBFILTER_OBJ = utils/smbfilter.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(SECRETS_OBJ) \
$(LIB_NONSMBD_OBJ) $(KRBCLIENT_OBJ)
PROTO_OBJ = $(SMBD_OBJ_MAIN) \
$(SMBD_OBJ_SRV) $(NMBD_OBJ1) $(SWAT_OBJ1) $(LIB_OBJ) $(LIBSMB_OBJ) \
$(SMBTORTURE_OBJ1) $(RPCCLIENT_OBJ1) \
$(LIBMSRPC_OBJ) \
$(RPC_PIPE_OBJ) $(RPC_PARSE_OBJ) $(KRBCLIENT_OBJ) \
$(AUTH_OBJ) $(PARAM_OBJ) $(LOCKING_OBJ) $(SECRETS_OBJ) \
$(PRINTING_OBJ) $(PRINTBACKEND_OBJ) $(OPLOCK_OBJ) $(NOTIFY_OBJ) \
$(PASSDB_OBJ) $(GROUPDB_OBJ) \
$(READLINE_OBJ) $(PROFILE_OBJ) $(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) \
$(AUTH_SAM_OBJ) $(REGISTRY_OBJ) $(POPT_LIB_OBJ) \
$(RPC_LSA_OBJ) $(RPC_NETLOG_OBJ) $(RPC_SAMR_OBJ) $(RPC_REG_OBJ) $(RPC_LSA_DS_OBJ) \
$(RPC_SVC_OBJ) $(RPC_WKS_OBJ) $(RPC_DFS_OBJ) $(RPC_SPOOLSS_OBJ) \
$(RPC_ECHO_OBJ) $(RPC_SVCCTL_OBJ) $(RPC_EVENTLOG_OBJ) $(SMBLDAP_OBJ) \
$(IDMAP_OBJ) libsmb/spnego.o $(PASSCHANGE_OBJ) \
$(RPC_NTSVCS_OBJ) utils/passwd_util.o
WINBIND_WINS_NSS_OBJ = nsswitch/wins.o $(PARAM_OBJ) \
$(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) $(NSSWINS_OBJ) $(KRBCLIENT_OBJ)
WINBIND_WINS_NSS_PICOBJS = $(WINBIND_WINS_NSS_OBJ:.o=.po)
PICOBJS = $(SMBWRAPPER_OBJ:.o=.po)
LIBSMBCLIENT_PICOBJS = $(LIBSMBCLIENT_OBJ:.o=.po)
LIBSMBSHAREMODES_PICOBJS = $(LIBSMBSHAREMODES_OBJ:.o=.po)
CAC_PICOBJS = $(CAC_OBJ:.o=.po)
PAM_SMBPASS_OBJ_0 = pam_smbpass/pam_smb_auth.o pam_smbpass/pam_smb_passwd.o \
pam_smbpass/pam_smb_acct.o pam_smbpass/support.o \
$(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
$(SECRETS_OBJ) $(SMBLDAP_OBJ) $(LIBSAMBA_OBJ) \
$(RPC_PARSE_OBJ1) $(DOSERR_OBJ)
PAM_SMBPASS_PICOOBJ = $(PAM_SMBPASS_OBJ_0:.o=.po)
IDMAP_OBJ = sam/idmap.o sam/idmap_util.o sam/idmap_tdb.o
WINBINDD_OBJ1 = \
nsswitch/winbindd.o \
nsswitch/winbindd_user.o \
nsswitch/winbindd_group.o \
nsswitch/winbindd_util.o \
nsswitch/winbindd_cache.o \
nsswitch/winbindd_pam.o \
nsswitch/winbindd_sid.o \
nsswitch/winbindd_misc.o \
nsswitch/winbindd_cm.o \
nsswitch/winbindd_wins.o \
nsswitch/winbindd_rpc.o \
nsswitch/winbindd_reconnect.o \
nsswitch/winbindd_ads.o \
nsswitch/winbindd_passdb.o \
nsswitch/winbindd_dual.o \
nsswitch/winbindd_async.o \
nsswitch/winbindd_creds.o \
nsswitch/winbindd_cred_cache.o
WINBINDD_OBJ = \
$(WINBINDD_OBJ1) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
$(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
$(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(RPC_PARSE_OBJ) \
$(PROFILE_OBJ) $(SLCACHE_OBJ) $(SMBLDAP_OBJ) \
$(SECRETS_OBJ) $(LIBADS_OBJ) $(KRBCLIENT_OBJ) $(POPT_LIB_OBJ) \
$(DCUTIL_OBJ) $(IDMAP_OBJ) \
$(AFS_OBJ) $(AFS_SETTOKEN_OBJ) \
$(LIBADS_SERVER_OBJ) $(SERVER_MUTEX_OBJ)
WBINFO_OBJ = nsswitch/wbinfo.o $(LIBSAMBA_OBJ) $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
$(SECRETS_OBJ) $(POPT_LIB_OBJ) $(AFS_SETTOKEN_OBJ) $(RPC_PARSE_OBJ1) $(DOSERR_OBJ)
WINBIND_NSS_OBJ = $(WBCOMMON_OBJ) lib/replace1.o nsswitch/winbind_nss_linux.o
WINBIND_NSS_PICOBJS = $(WINBIND_NSS_OBJ:.o=.po) lib/snprintf.po
POPT_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
popt/popthelp.o popt/poptparse.o
INIPARSER_OBJ = iniparser/src/iniparser.o iniparser/src/dictionary.o \
iniparser/src/strlib.o
TDBBACKUP_OBJ = tdb/tdbbackup.o tdb/tdbback.o $(SNPRINTF_OBJ) $(TDBBASE_OBJ)
TDBTOOL_OBJ = tdb/tdbtool.o $(TDBBASE_OBJ) $(SNPRINTF_OBJ)
TDBDUMP_OBJ = tdb/tdbdump.o $(TDBBASE_OBJ) $(SNPRINTF_OBJ)
NTLM_AUTH_OBJ1 = utils/ntlm_auth.o utils/ntlm_auth_diagnostics.o
NTLM_AUTH_OBJ = ${NTLM_AUTH_OBJ1} $(LIBSAMBA_OBJ) $(POPT_LIB_OBJ) \
libsmb/asn1.o libsmb/spnego.o libsmb/clikrb5.o libads/kerberos.o \
libads/kerberos_verify.o $(SECRETS_OBJ) $(SERVER_MUTEX_OBJ) \
libads/authdata.o $(RPC_PARSE_OBJ1) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
$(SMBLDAP_OBJ) $(DOSERR_OBJ) rpc_parse/parse_net.o $(LIBNMB_OBJ)
######################################################################
# now the rules...
######################################################################
all : SHOWFLAGS proto_exists $(SBIN_PROGS) $(BIN_PROGS) $(ROOT_SBIN_PROGS) \
$(SHLIBS) $(MODULES) $(PAM_MODULES)
pam_modules : $(PAM_MODULES)
pam_smbpass : SHOWFLAGS proto_exists bin/pam_smbpass.so
pam_winbind : SHOWFLAGS proto_exists bin/pam_winbind.so
smbwrapper : SHOWFLAGS
torture : SHOWFLAGS $(TORTURE_PROGS)
smbtorture : SHOWFLAGS bin/smbtorture
masktest : SHOWFLAGS bin/masktest
msgtest : SHOWFLAGS bin/msgtest
locktest : SHOWFLAGS bin/locktest
smbcacls : SHOWFLAGS bin/smbcacls
smbcquotas : SHOWFLAGS bin/smbcquotas
smbctool: SHOWFLAGS bin/smbctool
locktest2 : SHOWFLAGS bin/locktest2
rpctorture : SHOWFLAGS bin/rpctorture
debug2html : SHOWFLAGS bin/debug2html
smbfilter : SHOWFLAGS bin/smbfilter
eventlogadm: SHOWFLAGS bin/eventlogadm
talloctort : SHOWFLAGS bin/talloctort
timelimit : SHOWFLAGS bin/timelimit
nsswitch : SHOWFLAGS bin/winbindd bin/wbinfo nsswitch/libnss_winbind.so \
nsswitch/libnss_wins.so bin/pam_winbind.so
wins : SHOWFLAGS nsswitch/libnss_wins.so
modules: SHOWFLAGS proto_exists $(MODULES)
cac: SHOWFLAGS $(LIBMSRPC)
everything: all libsmbclient debug2html smbfilter talloctort modules torture \
$(EVERYTHING_PROGS)
.SUFFIXES:
.SUFFIXES: .c .o .po .lo
SHOWFLAGS:
@echo "Using FLAGS = $(FLAGS)"
@echo " LIBS = $(LIBS)"
@echo " LDSHFLAGS = $(LDSHFLAGS)"
@echo " LDFLAGS = $(LDFLAGS)"
@echo " PIE_CFLAGS = "
@echo " PIE_LDFLAGS = "
MAKEDIR = || exec false; \
if test -d "$$dir"; then :; else \
echo mkdir "$$dir"; \
mkdir -p "$$dir" >/dev/null 2>&1 || \
test -d "$$dir" || \
mkdir "$$dir" || \
exec false; fi || exec false
.c.o:
@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
@if test -n "$(CC_CHECKER)"; then \
echo "Checking $*.c with '$(CC_CHECKER)'";\
$(CC_CHECKER) -I. -I$(srcdir) $(FLAGS) -c $< -o $@;\
fi
@echo Compiling $*.c
@$(CC) -I. -I$(srcdir) $(FLAGS) -c $< -o $@
# -mv `echo $@ | sed 's%^.*/%%g'` $@
# this adds support for precompiled headers. To use it, install a snapshot
# of gcc-3.4 and run 'make pch' before you do the main build.
pch: proto_exists
rm -f $(builddir)/include/includes.h.gch
$(CC) -I. -I$(srcdir) $(FLAGS) -c $(srcdir)/include/includes.h -o $(builddir)/include/includes.h.gch
# These dependencies are only approximately correct: we want to make
# sure Samba's paths are updated if ./configure is re-run. Really it
# would be nice if "make prefix=/opt/samba all" also rebuilt things,
# but since we also require "make install prefix=/opt/samba" *not* to
# rebuild it's a bit hard.
dynconfig.o: dynconfig.c Makefile
@echo Compiling $*.c
@$(CC) $(FLAGS) $(PATH_FLAGS) -c $(srcdir)/dynconfig.c -o $@
dynconfig.po: dynconfig.c Makefile
@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
@echo Compiling $*.c with -fPIC
@$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) -fPIC -c $(srcdir)/dynconfig.c -o $@
# -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
lib/pidfile.o: lib/pidfile.c
@echo Compiling $*.c
@$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) -c $(srcdir)/lib/pidfile.c -o $@
lib/pidfile.po: lib/pidfile.c
@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
@echo Compiling $*.c with -fPIC
@$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) -fPIC -c $(srcdir)/lib/pidfile.c -o $@
# -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
lib/version.o: lib/version.c include/version.h
@echo Compiling $*.c
@$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) -c $(srcdir)/lib/version.c -o $@
lib/version.po: lib/version.c include/version.h
@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
@echo Compiling $*.c with -fPIC
@$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) -fPIC -c $(srcdir)/lib/version.c -o $@
# -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
smbd/build_options.o: smbd/build_options.c Makefile include/config.h include/build_env.h include/proto.h
@echo Compiling $*.c
@$(CC) $(FLAGS) $(PATH_FLAGS) -c smbd/build_options.c -o $@
smbd/build_options.c: include/config.h.in script/mkbuildoptions.awk
@echo Generating $@
@dir=smbd $(MAKEDIR) && $(AWK) -f $(srcdir)/script/mkbuildoptions.awk > $(builddir)/smbd/build_options.c < $(srcdir)/include/config.h.in
.c.po:
@if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
@if test -n "$(CC_CHECKER)"; then \
echo "Checking $*.c with '$(CC_CHECKER)' and -fPIC";\
$(CC_CHECKER) -I. -I$(srcdir) $(FLAGS) -fPIC -c $< -o $*.po;\
fi
@echo Compiling $*.c with -fPIC
@$(CC) -I. -I$(srcdir) $(FLAGS) -fPIC -c $< -o $*.po
# -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
bin/.dummy:
@if (: >> $@ || : > $@) >/dev/null 2>&1; then :; else \
dir=bin $(MAKEDIR); fi
@: >> $@ || : > $@ # what a fancy emoticon!
bin/smbd: $(SMBD_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBD_OBJ) $(LDFLAGS) $(LDAP_LIBS) \
$(KRB5LIBS) $(DYNEXP) $(PRINT_LIBS) $(AUTH_LIBS) \
$(ACL_LIBS) $(PASSDB_LIBS) $(LIBS) $(POPT_OBJS)
bin/nmbd: $(NMBD_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(NMBD_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(POPT_OBJS) $(KRB5LIBS) $(LDAP_LIBS)
bin/swat: $(SWAT_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SWAT_OBJ) $(LDFLAGS) $(DYNEXP) $(PRINT_LIBS) \
$(AUTH_LIBS) $(LIBS) $(PASSDB_LIBS) $(POPT_OBJS) $(KRB5LIBS) $(LDAP_LIBS)
bin/rpcclient: $(RPCCLIENT_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(PASSDB_LIBS) $(RPCCLIENT_OBJ) \
$(DYNEXP) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) $(POPT_OBJS) \
$(KRB5LIBS) $(LDAP_LIBS)
bin/smbclient: $(CLIENT_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(CLIENT_OBJ) $(LDFLAGS) $(DYNEXP) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) $(POPT_OBJS) $(KRB5LIBS) $(LDAP_LIBS)
bin/smbctool: $(TOOL_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(TOOL_OBJ) $(LDFLAGS) $(DYNEXP) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) $(POPT_OBJS) $(KRB5LIBS) $(LDAP_LIBS) -Lbin -lsmbclient
bin/net: $(NET_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(NET_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) $(POPT_OBJS) $(KRB5LIBS) $(LDAP_LIBS) $(PASSDB_LIBS) $(TERMLDFLAGS) $(TERMLIBS)
bin/profiles: $(PROFILES_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(PROFILES_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) $(POPT_OBJS)
bin/smbspool: $(CUPS_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(CUPS_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)
bin/smbmount: $(MOUNT_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(MOUNT_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)
bin/smbmnt: $(MNT_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(MNT_OBJ) $(DYNEXP) $(LDFLAGS)
bin/smbumount: $(UMOUNT_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(UMOUNT_OBJ) $(DYNEXP) $(LDFLAGS)
bin/mount.cifs: $(CIFS_MOUNT_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(CIFS_MOUNT_OBJ) $(DYNEXP) $(LDFLAGS)
bin/umount.cifs: $(CIFS_UMOUNT_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(CIFS_UMOUNT_OBJ) $(DYNEXP) $(LDFLAGS)
bin/testparm: $(TESTPARM_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(TESTPARM_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(POPT_OBJS)
bin/smbstatus: $(STATUS_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(STATUS_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) \
$(POPT_OBJS)
bin/smbcontrol: $(SMBCONTROL_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) -DUSING_SMBCONTROL $(FLAGS) -o $@ \
$(SMBCONTROL_OBJ) $(DYNEXP) $(LDFLAGS) \
$(LIBS) $(POPT_OBJS)
bin/smbtree: $(SMBTREE_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBTREE_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(POPT_OBJS) $(KRB5LIBS) $(LDAP_LIBS)
bin/smbpasswd: $(SMBPASSWD_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBPASSWD_OBJ) $(LDFLAGS) $(PASSDB_LIBS) \
$(DYNEXP) $(LIBS) $(POPT_OBJS) $(KRB5LIBS) $(LDAP_LIBS)
bin/pdbedit: $(PDBEDIT_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(PDBEDIT_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(POPT_OBJS) $(PASSDB_LIBS) $(LDAP_LIBS)
bin/smbget: $(SMBGET_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBGET_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(POPT_OBJS) $(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS)
bin/samtest: $(SAMTEST_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SAMTEST_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(DYNEXP) $(LIBS) $(POPT_OBJS) $(PASSDB_LIBS) $(KRB5LIBS) $(LDAP_LIBS)
bin/nmblookup: $(NMBLOOKUP_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(NMBLOOKUP_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(POPT_OBJS) $(LDAP_LIBS)
bin/smbtorture: $(SMBTORTURE_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBTORTURE_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)
bin/talloctort: $(TALLOCTORT_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(TALLOCTORT_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS)
bin/masktest: $(MASKTEST_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(MASKTEST_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)
bin/msgtest: $(MSGTEST_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(MSGTEST_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)
bin/smbcacls: $(SMBCACLS_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBCACLS_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) $(POPT_OBJS) \
$(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS)
bin/smbcquotas: $(SMBCQUOTAS_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBCQUOTAS_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) $(POPT_OBJS) \
$(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS)
bin/eventlogadm: $(EVTLOGADM_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(EVTLOGADM_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) $(POPT_OBJS)
bin/locktest: $(LOCKTEST_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(LOCKTEST_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)
bin/nsstest: $(NSSTEST_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(NSSTEST_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)
bin/vfstest: $(VFSTEST_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(VFSTEST_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(DYNEXP) $(PRINT_LIBS) $(AUTH_LIBS) $(ACL_LIBS) $(LIBS) $(POPT_OBJS) $(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS)
bin/smbiconv: $(SMBICONV_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBICONV_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(DYNEXP) $(LIBS) $(POPT_OBJS)
bin/log2pcap: $(LOG2PCAP_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(LOG2PCAP_OBJ) $(LDFLAGS) $(DYNEXP) $(POPT_OBJS) $(LIBS)
bin/locktest2: $(LOCKTEST2_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(LOCKTEST2_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)
bin/rpctorture: $(RPCTORTURE_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(RPCTORTURE_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)
bin/debug2html: $(DEBUG2HTML_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(DEBUG2HTML_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS)
bin/smbfilter: $(SMBFILTER_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBFILTER_OBJ) $(LDFLAGS) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)
bin/smbw_sample: $(SMBW_OBJ) utils/smbw_sample.o bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBW_OBJ) utils/smbw_sample.o $(LDFLAGS) $(DYNEXP) $(LIBS) $(KRB5LIBS) $(LDAP_LIBS)
bin/smbsh: $(SMBSH_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(SMBSH_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS)
bin/smbwrapper.so: $(PICOBJS) bin/.dummy
@echo Linking shared library $@
@$(SHLD) $(LDSHFLAGS) -o $@ $(PICOBJS) $(LIBS) \
$(KRB5LIBS) $(LDAP_LIBS) \
-Wl,-soname=`basename $@`
bin/libsmbclient.so: $(LIBSMBCLIENT_PICOBJS)
@echo Linking libsmbclient shared library $@
@$(SHLD) $(LDSHFLAGS) -o $@ $(LIBSMBCLIENT_PICOBJS) $(LDFLAGS) $(LIBS) \
$(KRB5LIBS) $(LDAP_LIBS) \
-Wl,-soname=`basename $@`.$(LIBSMBCLIENT_MAJOR)
bin/libsmbclient.a: $(LIBSMBCLIENT_PICOBJS)
@echo Linking libsmbclient non-shared library $@
@-$(AR) -rc $@ $(LIBSMBCLIENT_PICOBJS)
bin/libsmbsharemodes.so: $(LIBSMBSHAREMODES_PICOBJS)
@echo Linking libsmbsharemodes shared library $@
@$(SHLD) $(LDSHFLAGS) -o $@ $(LIBSMBSHAREMODES_PICOBJS) $(LDFLAGS) $(LIBS) \
$(KRB5LIBS) $(LDAP_LIBS) \
-Wl,-soname=`basename $@`.$(LIBSMBSHAREMODES_MAJOR)
bin/libsmbsharemodes.a: $(LIBSMBSHAREMODES_PICOBJS)
@echo Linking libsmbsharemodes non-shared library $@
@-$(AR) -rc $@ $(LIBSMBSHAREMODES_PICOBJS)
bin/libmsrpc.so: $(CAC_PICOBJS)
@echo Linking libmsrpc shared library $@
@$(SHLD) $(LDSHFLAGS) -o $@ $(CAC_PICOBJS) $(LDFLAGS) $(LIBS) \
-Wl,-soname=`basename $@`.$(LIBMSRPC_MAJOR)
bin/libmsrpc.a: $(CAC_PICOBJS)
@echo Linking libmsrpc non-shared library $@
@-$(AR) -rc $@ $(CAC_PICOBJS)
# This is probably wrong for anything other than the GNU linker.
bin/libbigballofmud.so: $(LIBBIGBALLOFMUD_PICOBJS)
@echo Linking bigballofmud shared library $@
@$(SHLD) $(LDSHFLAGS) -o $@ $(LIBBIGBALLOFMUD_PICOBJS) $(LIBS) \
$(PASSDB_LIBS) $(IDMAP_LIBS) $(KRB5LIBS) $(LDAP_LIBS) \
-Wl,-soname=`basename $@`.$(LIBBIGBALLOFMUD_MAJOR)
ln -snf libbigballofmud.so bin/libbigballofmud.so.0
# It would be nice to build a static bigballofmud too, but when I try
# I get linker errors about dl_open and similar things. I'm not sure if
# it can be fixed or if they just can't be called from a static
# library.
libsmbclient: $(LIBSMBCLIENT)
libsmbsharemodes: $(LIBSMBSHAREMODES)
libmsrpc: $(LIBMSRPC)
bin/librpc_lsarpc.so: $(RPC_LSA_OBJ)
@echo "Linking $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_LSA_OBJ) -lc \
-Wl,-soname=`basename $@`
bin/librpc_samr.so: $(RPC_SAMR_OBJ)
@echo "Linking $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_SAMR_OBJ) -lc \
-Wl,-soname=`basename $@`
bin/librpc_srvsvc.so: $(RPC_SVC_OBJ)
@echo "Linking $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_SVC_OBJ) -lc \
-Wl,-soname=`basename $@`
bin/librpc_svcctl.so: $(RPC_SVCCTL_OBJ)
@echo "Linking $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_SVCCTL_OBJ) -lc \
-Wl,-soname=`basename $@`
bin/librpc_ntsvcs.so: $(RPC_NTSVCS_OBJ)
@echo "Linking $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_NTSVCS_OBJ) -lc \
-Wl,-soname=`basename $@`
bin/librpc_wkssvc.so: $(RPC_WKS_OBJ)
@echo "Linking $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_WKS_OBJ) -lc \
-Wl,-soname=`basename $@`
bin/librpc_NETLOGON.so: $(RPC_NETLOG_OBJ)
@echo "Linking $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_NETLOG_OBJ) -lc \
-Wl,-soname=`basename $@`
bin/librpc_winreg.so: $(RPC_REG_OBJ)
@echo "Linking $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_REG_OBJ) -lc \
-Wl,-soname=`basename $@`
bin/librpc_lsa_ds.so: $(RPC_LSA_DS_OBJ)
@echo "Linking $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_LSA_DS_OBJ) -lc \
-Wl,-soname=`basename $@`
bin/librpc_spoolss.so: $(RPC_SPOOLSS_OBJ)
@echo "Linking $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_SPOOLSS_OBJ) -lc \
-Wl,-soname=`basename $@`
bin/librpc_eventlog.so: $(RPC_EVENTLOG_OBJ)
@echo "Linking $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_EVENTLOG_OBJ) -lc \
-Wl,-soname=`basename $@`
bin/librpc_netdfs.so: $(RPC_DFS_OBJ)
@echo "Linking $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_DFS_OBJ) -lc \
-Wl,-soname=`basename $@`
bin/librpc_echo.so: $(RPC_ECHO_OBJ)
@echo "Linking $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_ECHO_OBJ) -lc \
-Wl,-soname=`basename $@`
bin/winbindd: $(WINBINDD_OBJ) $(POPT_OBJS) bin/.dummy
@echo "Linking $@"
@$(CC) $(FLAGS) -o $@ $(WINBINDD_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) \
$(POPT_OBJS) $(KRB5LIBS) $(LDAP_LIBS) $(PASSDB_LIBS)
# Please don't add .o files to libnss_winbind, libnss_wins, or the pam_winbind
# libraries. Add to the appropriate PICOBJ variable instead.
nsswitch/libnss_winbind.so: $(WINBIND_NSS_PICOBJS)
@echo "Linking $@"
@$(SHLD) $(WINBIND_NSS_LDSHFLAGS) -o $@ $(WINBIND_NSS_PICOBJS) \
-Wl,-soname=`basename $@`.2
nsswitch/libnss_wins.so: $(WINBIND_WINS_NSS_PICOBJS)
@echo "Linking $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(WINBIND_WINS_NSS_PICOBJS) \
$(LDAP_LIBS) $(KRB5LIBS) \
-Wl,-soname=`basename $@`.2
bin/pam_winbind.so: $(PAM_WINBIND_OBJ:.o=.po) bin/.dummy
@echo "Linking shared library $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(PAM_WINBIND_OBJ:.o=.po) \
-Wl,-soname=`basename $@` -lpam -liniparser
bin/builtin.so: $(AUTH_BUILTIN_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(AUTH_BUILTIN_OBJ:.o=.po) -Wl,-soname=`basename $@`
bin/domain.so: $(AUTH_DOMAIN_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(AUTH_DOMAIN_OBJ:.o=.po) -Wl,-soname=`basename $@`
bin/script.so: $(AUTH_SCRIPT_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(AUTH_SCRIPT_OBJ:.o=.po) -Wl,-soname=`basename $@`
bin/smbserver.so: $(AUTH_SERVER_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(AUTH_SERVER_OBJ:.o=.po) -Wl,-soname=`basename $@`
bin/winbind.so: $(AUTH_WINBIND_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(AUTH_WINBIND_OBJ:.o=.po) -Wl,-soname=`basename $@`
bin/unix.so: $(AUTH_UNIX_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(AUTH_UNIX_OBJ:.o=.po) -Wl,-soname=`basename $@`
bin/sam.so: $(AUTH_SAM_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(AUTH_SAM_OBJ:.o=.po) -Wl,-soname=`basename $@`
bin/ldapsam.so: passdb/pdb_ldap.po
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) $(LDAP_LIBS) -o $@ passdb/pdb_ldap.po \
-Wl,-soname=`basename $@`
bin/tdbsam.so: passdb/pdb_tdb.po
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ passdb/pdb_tdb.po \
-Wl,-soname=`basename $@`
bin/smbpasswd.so: passdb/pdb_smbpasswd.po
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ passdb/pdb_smbpasswd.po \
-Wl,-soname=`basename $@`
bin/rid.so: sam/idmap_rid.po
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ sam/idmap_rid.po \
-Wl,-soname=`basename $@`
bin/ad.so: sam/idmap_ad.po
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ sam/idmap_ad.po \
-Wl,-soname=`basename $@`
bin/weird.so: $(DEVEL_HELP_WEIRD_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(DEVEL_HELP_WEIRD_OBJ:.o=.po) \
-Wl,-soname=`basename $@`
bin/CP850.so: $(CP850_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(CP850_OBJ:.o=.po) \
-Wl,-soname=`basename $@`
bin/CP437.so: $(CP437_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(CP437_OBJ:.o=.po) \
-Wl,-soname=`basename $@`
bin/macosxfs.so: $(CHARSET_MACOSXFS_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(CHARSET_MACOSXFS_OBJ:.o=.po) \
-framework CoreFoundation -Wl,-soname=`basename $@`
bin/audit.so: $(VFS_AUDIT_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_AUDIT_OBJ:.o=.po) \
-Wl,-soname=`basename $@`
bin/extd_audit.so: $(VFS_EXTD_AUDIT_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_EXTD_AUDIT_OBJ:.o=.po) \
-Wl,-soname=`basename $@`
bin/full_audit.so: $(VFS_FULL_AUDIT_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_FULL_AUDIT_OBJ:.o=.po) \
-Wl,-soname=`basename $@`
bin/recycle.so: $(VFS_RECYCLE_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_RECYCLE_OBJ:.o=.po) \
-Wl,-soname=`basename $@`
bin/netatalk.so: $(VFS_NETATALK_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_NETATALK_OBJ:.o=.po) \
-Wl,-soname=`basename $@`
bin/fake_perms.so: $(VFS_FAKE_PERMS_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_FAKE_PERMS_OBJ:.o=.po) \
-Wl,-soname=`basename $@`
bin/default_quota.so: $(VFS_DEFAULT_QUOTA_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_DEFAULT_QUOTA_OBJ:.o=.po) \
-Wl,-soname=`basename $@`
bin/readonly.so: $(VFS_READONLY_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_READONLY_OBJ:.o=.po) \
-Wl,-soname=`basename $@`
bin/shadow_copy.so: $(VFS_SHADOW_COPY_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_SHADOW_COPY_OBJ:.o=.po) \
-Wl,-soname=`basename $@`
bin/cap.so: $(VFS_CAP_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_CAP_OBJ:.o=.po) \
-Wl,-soname=`basename $@`
bin/expand_msdfs.so: $(VFS_EXPAND_MSDFS_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_EXPAND_MSDFS_OBJ:.o=.po) \
-Wl,-soname=`basename $@`
bin/afsacl.so: $(VFS_AFSACL_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_AFSACL_OBJ:.o=.po) \
-Wl,-soname=`basename $@`
bin/catia.so: $(VFS_CATIA_OBJ:.o=.po)
@echo "Building plugin $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_CATIA_OBJ:.o=.po) \
-Wl,-soname=`basename $@`
bin/wbinfo: $(WBINFO_OBJ) $(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(WBINFO_OBJ) $(DYNEXP) $(LIBS) $(POPT_OBJS)
bin/ntlm_auth: $(NTLM_AUTH_OBJ) $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) \
$(POPT_OBJS) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(DYNEXP) $(NTLM_AUTH_OBJ) \
$(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(LIBS) \
$(POPT_OBJS) $(KRB5LIBS) $(LDAP_LIBS) $(NSCD_LIBS)
bin/pam_smbpass.so: $(PAM_SMBPASS_PICOOBJ)
@echo "Linking shared library $@"
@$(SHLD) $(LDSHFLAGS) -o $@ $(PAM_SMBPASS_PICOOBJ) -lpam $(DYNEXP) $(LIBS) $(LDAP_LIBS) $(KRB5LIBS)
bin/tdbbackup: $(TDBBACKUP_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(DYNEXP) $(LIBS) $(TDBBACKUP_OBJ)
bin/tdbtool: $(TDBTOOL_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(DYNEXP) $(LIBS) $(TDBTOOL_OBJ)
bin/tdbdump: $(TDBDUMP_OBJ) bin/.dummy
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(LDFLAGS) $(DYNEXP) $(LIBS) $(TDBDUMP_OBJ)
bin/t_strcmp: bin/libbigballofmud.so torture/t_strcmp.o
$(CC) $(FLAGS) -o $@ $(DYNEXP) $(LIBS) torture/t_strcmp.o -L ./bin -lbigballofmud
bin/t_strstr: bin/libbigballofmud.so torture/t_strstr.o
$(CC) $(FLAGS) -o $@ $(DYNEXP) $(LIBS) torture/t_strstr.o -L ./bin -lbigballofmud
bin/t_strappend: bin/libbigballofmud.so torture/t_strappend.o
$(CC) $(FLAGS) -o $@ $(DYNEXP) $(LIBS) torture/t_strappend.o -L ./bin -lbigballofmud
bin/t_stringoverflow: bin/libbigballofmud.so torture/t_stringoverflow.o
$(CC) $(FLAGS) -o $@ $(DYNEXP) torture/t_stringoverflow.o -L./bin -lbigballofmud
bin/t_doschar: bin/libbigballofmud.so torture/t_doschar.o
$(CC) $(FLAGS) -o $@ $(DYNEXP) $(LIBS) torture/t_doschar.o -L ./bin -lbigballofmud
bin/t_push_ucs2: bin/libbigballofmud.so torture/t_push_ucs2.o
$(CC) $(FLAGS) -o $@ $(DYNEXP) $(LIBS) torture/t_push_ucs2.o -L ./bin -lbigballofmud
bin/t_snprintf: lib/snprintf.c
$(CC) $(FLAGS) -o $@ $(DYNEXP) -DTEST_SNPRINTF lib/snprintf.c -lm
bin/timelimit: script/tests/timelimit.o
@echo Linking $@
@$(CC) $(FLAGS) -o $@ $(DYNEXP) script/tests/timelimit.o
install: installservers installbin installcifsmount installman installscripts installdat installswat installmodules installclientlib installlibmsrpc
install-everything: install installmodules
# DESTDIR is used here to prevent packagers wasting their time
# duplicating the Makefile. Remove it and you will have the privelege
# of package each samba release for muliple versions of multiple
# distributions and operating systems, or at least supplying patches
# to all the packaging files required for this, prior to committing
# the removal of DESTDIR. Do not remove it even though you think it
# is not used
installdirs:
@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(BINDIR) $(SBINDIR) $(LIBDIR) $(VARDIR) $(PRIVATEDIR) $(PIDDIR) $(LOCKDIR) $(MANDIR)
installservers: all installdirs
@$(SHELL) script/installbin.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(SBINDIR) $(SBIN_PROGS)
installbin: all installdirs
@$(SHELL) script/installbin.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(BINDIR) $(BIN_PROGS)
installcifsmount: bin/mount.cifs bin/umount.cifs
@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS) $(DESTDIR) $(ROOTSBINDIR)
@$(SHELL) script/installbin.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(ROOTSBINDIR) bin/mount.cifs bin/umount.cifs
# Some symlinks are required for the 'probing' of modules.
# This mechanism should go at some point..
installmodules: modules installdirs
@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(VFSLIBDIR) $(VFS_MODULES)
@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(PDBLIBDIR) $(PDB_MODULES)
@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(RPCLIBDIR) $(RPC_MODULES)
@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(IDMAPLIBDIR) $(IDMAP_MODULES)
@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(CHARSETLIBDIR) $(CHARSET_MODULES)
@$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(AUTHLIBDIR) $(AUTH_MODULES)
@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(PDBLIBDIR) ldapsam.so ldapsam_compat.so
@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(AUTHLIBDIR) rhosts.so hostsequiv.so
@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(AUTHLIBDIR) sam.so sam_ignoredomain.so
@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(AUTHLIBDIR) domain.so trustdomain.so ntdomain.so
@$(SHELL) $(srcdir)/script/linkmodules.sh $(DESTDIR)$(AUTHLIBDIR) builtin.so guest.so fixed_challenge.so name_to_ntstatus.so
installscripts: installdirs
@$(SHELL) $(srcdir)/script/installscripts.sh $(INSTALLPERMS) $(DESTDIR)$(BINDIR) $(SCRIPTS)
installdat: installdirs
@$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR) $(LIBDIR) $(srcdir)
installmsg: installdirs
@$(SHELL) $(srcdir)/script/installmsg.sh $(DESTDIR) $(LIBDIR) $(srcdir)
installswat: installdirs installmsg
@$(SHELL) $(srcdir)/script/installswat.sh $(DESTDIR) $(SWATDIR) $(srcdir)
installclientlib: installdirs libsmbclient
@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS) $(DESTDIR) $(LIBDIR)
-$(INSTALLLIBCMD_SH) bin/libsmbclient.so $(DESTDIR)$(LIBDIR)
-$(INSTALLLIBCMD_A) bin/libsmbclient.a $(DESTDIR)$(LIBDIR)
@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS) $(DESTDIR) ${prefix}/include
-$(INSTALLCMD) $(srcdir)/include/libsmbclient.h $(DESTDIR)${prefix}/include
installlibmsrpc: installdirs libmsrpc
@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS) $(DESTDIR) $(LIBDIR)
-$(INSTALLLIBCMD_SH) bin/libmsrpc.so $(DESTDIR)$(LIBDIR)
-$(INSTALLLIBCMD_A) bin/libmsrpc.a $(DESTDIR)$(LIBDIR)
@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS) $(DESTDIR) ${prefix}/include
-$(INSTALLCMD) $(srcdir)/include/libmsrpc.h $(DESTDIR)${prefix}/include
installpammodules: $(PAM_MODULES)
@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS) $(DESTDIR) $(PAMMODULESDIR)
@for module in $(PAM_MODULES); do \
echo "Installing module $${module} as $(DESTDIR)/$(PAMMODULESDIR)/$${module}.so "; \
$(INSTALLCMD) -m $(INSTALLPERMS) bin/$${module}.so \
"$(DESTDIR)/$(PAMMODULESDIR)"; \
done
# Python extensions
PYTHON_OBJS = $(PARAM_OBJ) $(LIB_NONSMBD_OBJ) $(LIBSMB_OBJ) $(RPC_PARSE_OBJ) \
$(LIBMSRPC_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
$(SECRETS_OBJ) $(KRBCLIENT_OBJ) $(SMBLDAP_OBJ)
PYTHON_PICOBJS = $(PYTHON_OBJS:.o=.po)
python_ext: $(PYTHON_PICOBJS)
@if test -z "$(PYTHON)"; then \
echo Use the option --with-python to configure python; \
exit 1; \
fi
PYTHON_OBJS="$(PYTHON_PICOBJS)" \
PYTHON_CFLAGS="$(CFLAGS) $(CPPFLAGS) $(FLAGS)" \
LIBS="$(LDFLAGS) $(LIBS) $(PASSDB_LIBS) $(IDMAP_LIBS) $(KRB5LIBS) $(LDAP_LIBS)" \
$(PYTHON) python/setup.py build
python_install: $(PYTHON_PICOBJS)
@if test -z "$(PYTHON)"; then \
echo Use the option --with-python to configure python; \
exit 1; \
fi
PYTHON_OBJS="$(PYTHON_PICOBJS)" \
PYTHON_CFLAGS="$(CFLAGS) $(CPPFLAGS)" \
LIBS="$(LDFLAGS) $(LIBS)" \
$(PYTHON) python/setup.py install --root=$(DESTDIR)
python_clean:
@-if test -n "$(PYTHON)"; then $(PYTHON) python/setup.py clean; fi
# revert to the previously installed version
revert:
@$(SHELL) $(srcdir)/script/revert.sh $(SBINDIR) $(SBIN_PROGS)
@$(SHELL) $(srcdir)/script/revert.sh $(BINDIR) $(BIN_PROGS) $(SCRIPTS)
installman: installdirs
@$(SHELL) $(srcdir)/script/installman.sh $(DESTDIR)$(MANDIR) $(srcdir) C ""
.PHONY: showlayout
showlayout:
@echo "Samba will be installed into:"
@echo " prefix: $(prefix)"
@echo " bindir: $(BINDIR)"
@echo " sbindir: $(SBINDIR)"
@echo " libdir: $(LIBDIR)"
@echo " vardir: $(VARDIR)"
@echo " mandir: $(MANDIR)"
@echo " privatedir: $(PRIVATE_DIR)"
@echo " configdir: $(CONFIGDIR)"
@echo " lockdir: $(LOCKDIR)"
@echo " piddir: $(PIDDIR)"
@echo " swatdir: $(SWATDIR)"
uninstall: uninstallman uninstallservers uninstallbin uninstallcifsmount uninstallscripts uninstalldat uninstallswat uninstallmodules uninstallclientlib uninstalllibmsrpc
uninstallman:
@$(SHELL) $(srcdir)/script/uninstallman.sh $(DESTDIR)$(MANDIR) $(srcdir) C
uninstallservers:
@$(SHELL) script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(SBINDIR) $(SBIN_PROGS)
uninstallbin:
@$(SHELL) script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(BINDIR) $(BIN_PROGS)
uninstallcifsmount:
@$(SHELL) script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(ROOTSBINDIR) bin/mount.cifs bin/umount.cifs
uninstallmodules:
@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(VFSLIBDIR) $(VFS_MODULES)
@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(PDBLIBDIR) $(PDB_MODULES)
@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(RPCLIBDIR) $(RPC_MODULES)
@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(IDMAPLIBDIR) $(IDMAP_MODULES)
@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(CHARSETLIBDIR) $(CHARSET_MODULES)
@$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR) $(prefix) $(AUTHLIBDIR) $(AUTH_MODULES)
uninstallscripts:
@$(SHELL) $(srcdir)/script/uninstallscripts.sh $(INSTALLPERMS) $(DESTDIR)$(BINDIR) $(SCRIPTS)
uninstalldat:
@$(SHELL) $(srcdir)/script/uninstalldat.sh $(DESTDIR) $(LIBDIR) $(srcdir)
uninstallmsg:
@$(SHELL) $(srcdir)/script/uninstallmsg.sh $(DESTDIR) $(LIBDIR) $(srcdir)
uninstallswat: uninstallmsg
@$(SHELL) $(srcdir)/script/uninstallswat.sh $(DESTDIR) $(SWATDIR) $(srcdir)
uninstallclientlib: installdirs libsmbclient
-$(UNINSTALLLIBCMD_SH) $(DESTDIR)$(LIBDIR)/libsmbclient.so
-$(UNINSTALLLIBCMD_A) $(DESTDIR)$(LIBDIR)/libsmbclient.a
-rm -f $(DESTDIR)${prefix}/include/libsmbclient.h
uninstalllibmsrpc: installdirs libmsrpc
-$(UNINSTALLLIBCMD_SH) $(DESTDIR)$(LIBDIR)/libmsrpc.so
-$(UNINSTALLLIBCMD_A) $(DESTDIR)$(LIBDIR)/libmsrpc.a
-rm -f $(DESTDIR)${prefix}/include/libmsrpc.h
uninstallpammodules:
@for module in $(PAM_MODULES); do \
echo "Removing $(DESTDIR)/$(PAMMODULESDIR)/$${module}.so "; \
rm -f "$(DESTDIR)/$(PAMMODULESDIR)/$${module}.so"; \
done
# Toplevel clean files
TOPFILES=dynconfig.o dynconfig.po
clean: delheaders python_clean
-rm -f core */*~ *~ */*.o */*.po */*.so \
$(TOPFILES) $(BIN_PROGS) $(SBIN_PROGS) $(ROOT_SBIN_PROGS) \
$(MODULES) $(TORTURE_PROGS) $(LIBSMBCLIENT) \
$(LIBSMBSHAREMODES) $(EVERYTHING_PROGS) $(LIBMSRPC) \
.headers.stamp */src/*.o */src/*.po
-rm -rf t_dir
# Making this target will just make sure that the prototype files
# exist, not necessarily that they are up to date. Since they're
# removed by "make clean" this will always be run when you do anything
# afterwards.
proto_exists: include/proto.h include/build_env.h \
nsswitch/winbindd_proto.h web/swat_proto.h \
client/client_proto.h utils/net_proto.h utils/ntlm_auth_proto.h smbd/build_options.c
delheaders:
@echo Removing prototype headers
@rm -f include/proto.h include/build_env.h \
nsswitch/winbindd_proto.h web/swat_proto.h \
client/client_proto.h utils/net_proto.h \
smbd/build_options.c utils/ntlm_auth_proto.h \
utils/passwd_proto.h
MKPROTO_SH = $(srcdir)/script/mkproto.sh
include/proto.h: smbd/build_options.c
@echo Building include/proto.h
@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
-h _PROTO_H_ $(builddir)/include/proto.h \
$(PROTO_OBJ)
include/build_env.h: script/build_env.sh
@echo Building include/build_env.h
@$(SHELL) $(srcdir)/script/build_env.sh $(srcdir) $(builddir) $(CC) \
> $(builddir)/include/build_env.h
nsswitch/winbindd_proto.h:
@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
-h _WINBINDD_PROTO_H_ $(builddir)/nsswitch/winbindd_proto.h \
$(WINBINDD_OBJ1)
web/swat_proto.h:
@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
-h _SWAT_PROTO_H_ $(builddir)/web/swat_proto.h \
$(SWAT_OBJ1)
client/client_proto.h:
@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
-h _CLIENT_PROTO_H_ $(builddir)/client/client_proto.h \
$(CLIENT_OBJ1)
utils/net_proto.h:
@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
-h _NET_PROTO_H_ $(builddir)/utils/net_proto.h \
$(NET_OBJ1)
utils/passwd_proto.h:
@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
-h _PASSWD_PROTO_H_ $(builddir)/utils/passwd_proto.h \
utils/passwd_util.o
utils/ntlm_auth_proto.h:
@cd $(srcdir) && $(SHELL) $(MKPROTO_SH) $(AWK) \
-h _NTLM_AUTH_PROTO_H_ $(builddir)/utils/ntlm_auth_proto.h \
$(NTLM_AUTH_OBJ1)
# "make headers" or "make proto" calls a subshell because we need to
# make sure these commands are executed in sequence even for a
# parallel make.
headers:
$(MAKE) delheaders; \
$(MAKE) smbd/build_options.c; \
$(MAKE) include/proto.h; \
$(MAKE) include/build_env.h; \
$(MAKE) nsswitch/winbindd_proto.h; \
$(MAKE) web/swat_proto.h; \
$(MAKE) client/client_proto.h; \
$(MAKE) utils/ntlm_auth_proto.h; \
$(MAKE) utils/net_proto.h; \
$(MAKE) utils/passwd_proto.h;
proto: headers
.PHONY: headers proto
etags:
etags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/`
ctags:
ctags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/`
realclean: clean delheaders
-rm -f config.log bin/.dummy script/findsmb script/gen-8bit-gap.sh
-rm -f script/installbin.sh script/uninstallbin.sh
distclean: realclean
-rm -f include/stamp-h
-rm -f include/config.h Makefile
-rm -f config.status config.cache so_locations
-rm -rf .deps TAGS
realdistclean: distclean
-rm -f include/config.h.in
-rm -f include/version.h
-rm -f configure
# this target is really just for my use. It only works on a limited
# range of machines and is used to produce a list of potentially
# dead (ie. unused) functions in the code. (tridge)
finddead:
nm */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
nm */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
comm -13 nmused.txt nmfns.txt
# when configure.in is updated, reconfigure
$(srcdir)/configure: $(srcdir)/configure.in
@echo "WARNING: you need to rerun ./autogen.sh"
config.status: $(srcdir)/configure
@echo "WARNING: you need to run ./configure"
Makefile: $(srcdir)/Makefile.in config.status
@echo "WARNING: you need to run ./config.status"
######################################################################
# Samba Testing Framework
# Check for PAM module problems. Specifically, check that every module we
# built can actually be loaded by a minimal PAM-aware application.
test_pam_modules: pam_modules
@echo "Testing $(PAM_MODULES) "
@for module in $(PAM_MODULES); do \
./script/tests/dlopen.sh -lpam -ldl bin/$${module}.so \
|| exit 1; \
done
##
## Targets for 'make test'
##
test: all torture timelimit
@echo Running Test suite
@sh ./script/tests/selftest.sh ${selftest_prefix}/st all "${smbtorture4_path}"
valgrindtest: all torture timelimit
@echo Running Test suite with valgrind
@NMBD_VALGRIND="xterm -n smbd -e valgrind -q --db-attach=yes --num-callers=30" \
SMBD_VALGRIND="xterm -n smbd -e valgrind -q --db-attach=yes --num-callers=30" \
VALGRIND="valgrind -q --num-callers=30 --log-file=${selftest_prefix}/st/valgrind.log" \
./script/tests/selftest.sh ${selftest_prefix}/st all "${smbtorture4_path}"
0 意見:
張貼留言